Product interface

    Main interface definition instructions , see figure (a)

J7（4PIN/2.0）12V power supply input interface

Pin NO.	definition	description
1	+12V	Power for the board
2	GND	Ground

J14（6PIN/2.0） Touch Panel interface

Pin NO.	definition	description
1	+5V	+5V
2	GND	Ground
3	SR42	Touch screen data
4	SR43
5	SR44
6	SR47

J13（9PIN/2.0）Reserved IO port

Pin NO.	definition	description
1	SR50	Function expansion interface
2	SR51
3	SR52
4	SR53
5	SR54
6	SR55
7	SR56
8	SR57
9	GND	Ground

J2（9PIN/2.0） Audio and AV signal output

Pin NO.	definition	description
1	GND	Ground
2	FR	Audio right channel output
3	FL	Audio left channel output
4	GND	Ground
5	AV	AV signal output

J8（6PIN/2.0） VGA or Ypbpr signal output

Pin NO.	definition	description
1	GND	Ground
2	VS	VSYNC
3	HS	HSYNC
4	V/B	B/V  Chromatism signal
5	Y/G	G/Y  Chromatism signal
6	U/R	R/U  Luminance signal

J15（4PIN/2.0）Barcode scanning interface

Pin NO.	definition	description
1	+5V	+5V
2	RX	RX
3	TX	TX
4	GND	Ground

J9（3PIN/2.0）Remote interface

Pin NO.	definition	description
1	+5V	+5V
2	GND	GND
3	IR	IR Receiver

 Product Features Description 

1.Use Powerful ES6461 decoder chip,With Stable performance and Powerful features .
2.Wide DC input voltage: 6 ~ 15V
3.Operating modes: normal operation mode(<2.4W), standby mode(<1.2W)
4.More than four storage media support functions: Support CF/USB2.0/Mini-USB/SD/MMC card, support hot swap
5.Compatible various media formats: including MP3, JPG, MPEG, AVI and other formats
6 Video format: PAL (25  frames), NTSC (30 frames), automatic
7.Video Output: Support AV, VGA (field frequency of 60Hz, line frequency 31.25kHz) or YPrPb component output, and optional output of multiple video at the same time, can change access TV and LCD display, support for 480i, 480p, 720p; video 75 ohm output impedance
8.Audio output: two-channel stereo audio output , SNR 85dB
9.Play mode: Repeat all , Repeat one, Play in order

Playback mode:Video, Photo, Music, Photo+Music ,Files

10.OSD Language: Support Chinese, English .Other languages can be customized
11.Remote Control:Support remote control for some often use control
12.Timer switch: You can setting the time for turn on and turn off the system  
13.Rolling subtitles: Words can be rolling show at the bottom of the screen . Need create a TXT file and put it into the memory card
14.Memory Play: In case of suddenly loses power ,the system will record the breakpoint .When power on ,It will Continue to playback from the breakpoint.

15.Play record :System will record the playing time for corresponding files .(Request create a TXT file and put it into memory card .)

16.Clock display: a clock IC, time and date information can be displayed

17.Support Logo shows feature: You can customized your logo and show it on the top left of the screen .

18.Support OTG copy feature: USB file can be automatically COPY to memory card, covered with the file with the same name and copy the file with different name to memory card 
19.Support keypad extension feature(Optional).Each button can be customized by some features you want it be .
20.Support touch  feature (Optional) . Have to use our touch panel controller  
21.Support bar code Scanner feature(Optional). Scanner should with RS232 interface
22.Support PIR detection feature(Optional). PIR sensor should with High or low level

23.Support OSD flip feature. You can flip the OSD Menu through OSD setting  
24.PCB size: 102MM(L) X 61MM(W) X 12MM(H)

PCB dimension figure
PCB：2 layer
PCB length： 102.0mm
PCB width： 61.0mm
Screw holes specifications：3.20mm x4